Laitance, cement and lime remover for construction equipment
GTL® is a cement and laitance stripper for the day-to-day maintenance of all building and civil engineering plant.
GTL® is much less hazardous than other products on the market which are based on citric, hydrochloric and phos-phoric acids.
GTL® has been designed to meet the various requirements of applicators - safety of use, effectiveness, low environ-mental impact and respect for the treated surfaces. Unlike conventional acid products it is not classed as a corrosive, meaning it poses much less of a hazard during use.
GTL® is for outdoor use for removing laitance, cement and lime from vehicles (powder tankers, concrete truck mixers, etc.) and from all plant and equipment used in building and civil engineering.
  • 70% biodegradable after 28 days.
  • No risk to the environment.
  • Powerful fast-acting stripper.
  • Noncorrosive.
  • Easy and quick to use.
  • Ready to use.
Apply with a low pressure sprayer.
Tools and equipment should be cleaned with water immediately after use.
  • It is essential to do tests first.
  • Shake the product well before use.
  • Spray the product with a low-pressure sprayer onto the dry substrate.
  • Leave the product to act for about 5 to 15 minutes. This time will vary depending on the thickness of the laitance to be removed.
  • Rinse the entire surface, preferably with a high-pres-sure cleaner, or optionally with a water jet, brushing all the time.
  • There is no need to neutralize after rinsing.
  • Physical state at 20°C: Viscous liquid.
  • Colour: Uncoloured.
  • Odour: Lemon.
  • pH: < 2.
  • Relative density: 1.13 ± 0.01.
  • Solubility in water [vol/vol]: Total.
  • Flashpoint [°C]: Not applicable.
  • VOCs: < 1 g/l*.
The following values are for guidance only:
8 to 10 m2/kg.
25 kg containers, 230 kg drums or 1000 kg IBC containers.
  • Store in a dry place at a temperature of between 5°C and 30°C.
  • Shelf-life: 24 months from date of manufacture, in original unopened can.
  • Wear protective gloves, clothes and goggles.
  • Do not allow product to dry.
  • Do not dilute or mix with another product.
  • For best results it is essential that, GTL® be used when the temperature of the substrates is between 5°C and 30°C.
  • Do not apply in rain or very hot weather. Air tempe-rature between 5°C and 30°C.
  • Breathing protection: No breathing protection equipment is required under normal use conditions with suitable ventilation.
  • Hand protection: Wear household rubber gloves.
  • Skin protection: Wear protective clothing over ex-posed areas of skin.
  • Eye protection: Wear protective goggles.
  • In case of ingestion: Do not induce vomiting. Contact a doctor or specialist.
KEEP OUT OF REACH OF CHILDREN.
Chemical future:
Formulation based on organic compounds.
GUARD INDUSTRIE (FRANCE)
Daniel Bruyat: Business Director
Phone: (+33) 65 84 46 13 73
Email: daniel.bruyat@guardindustrie.com
 
NANO PHAM GROUP (VIET NAM)
Hotline: (+84) 918 244 844
Email: global@nanophamgroup.com
Website:
 
Important: The content of this documentation is based on our experience with the product. Guard Industry guarantees the quality of its products but expresslydisclaims all liability if the user does not follow the recommendations and conditions of use of the products, especially but not exclusively in the case of faultyapplication, application by untrained personnel, use of products not compatible
with Guard Industry products, or adverse weather conditions For more information, consult the safety data sheet.
Accessing: 67
  • Ho Chi Minh
  • 97 Street No. 7, An Phu- An Khanh Urban Area, An Phu Ward (District 2), Thu Duc City, Ho Chi Minh City
  • Quang Ngai
  • 370 Nguyen Tu Tan Street, Tran Phu Ward, Quang Ngai City, Quang Ngai Province
  • Danang
  • K21/H2/1 Nguyen Van Hue Street, Thanh Khe Tay Ward, Thanh Khe District, Da Nang City
  • Thua Thien Hue
  • B08 The Manor Crown, To Huu Street, Hue City, Thua Thien Hue Province
  • Quang Binh
  • 37 Tran Kinh Street, Dong Hoi City, Quang Binh Province
  • Ha Tinh
  • 64 Le Thai To Street, Ky Thinh Commune, Ky Anh District, Ha Tinh Province
  • Thai Binh
  • 36A Quang Trung Street, Tran Hung Ward, Thai Binh Province
  • Thanh Hoa
  • 597 Street 1, Quang Hung Ward, Thanh Hoa City, Thanh Hoa Province
  • Hanoi
  • 99 Nhat Chieu Street, Nhat Tan Ward, Tay Ho District, Hanoi City
  • Hotline: 0918 244 844
  • Email:global@nanophamgroup.com
Total online: 1.610.410