Waterproofing and stain protection for all textiles that are subject to heavy traffic
TexGuard® Heavy Duty is the benchmark product for protecting all textiles that receive foot traffic.
TexGuard® Heavy Duty penetrates the fibre deeply to the weft, and can therefore waterproof and protect all fabrics, carpets and rugs against penetration by water, oil and stains of all kinds (fruit, wine, fizzy drinks, coffee, tea, ice, etc.).
TexGuard® Heavy Duty does not modify the fabric: it respects their feel, texture and colour. In addition, surface fireproofing treatments retain their properties.
TexGuard® Heavy Duty simplifies the maintenance of fabrics and slows their aging. After cleaning, TexGuard® Heavy Duty treatment remains active (still works after 5 washings).
TexGuard® Heavy Duty is used indoors and outdoors, without restriction, all types of natural and synthetic fabrics such as: cotton, velvet, suede, chintz, leather, and more. TexGuard® Heavy Duty is ideal for treating fabrics, carpets, rugs, sofas... submitted to heavy duty (restaurants, hotels, cinemas, theatres, waiting-rooms...).
  • Protection against water and greasy liquids.
  • Stain-, dirt- and adhesive-repellent.
  • Simplifies cleaning.
  • Colourless: does not change the feel or texture.
  • Resists to abrasion.
  • Compatible some fireproofing treatments, does not modify the flammability of the surface.
  • Stable and efficient treatment.

Apply using a low pressure pump sprayer with a flexible extension tube or manual spray gun as appropriate.
Empty the sprayer after each use and purge it with air.
Apply the product to a fabric that is clean, dust-free and dry. 
  • Test on a hidden part of the substrate to examine the reaction of the colour.
  • Apply product neat – do not dilute.
  • Apply in a mist using a low-pressure sprayer (2 bars) from a distance of 30 cm from the substrate, applying two coats at right angles to each other.
  • The substrate must not be impregnated to excess.
  • Drying time: 24 hours.
  • Full effects achieved after 1 to 2 days.
  • Physical state at 20 °C: Liquid.
  • Appearence: Uncoloured.
  • Odour: Solvent.
  • pH: Not applicable.
  • Boiling point [°C]: 198°C.
  • Density: 0.76 ± 0.02.
  • Solubility in water [vol/vol]: Insoluble.
  • Flash point [°C]: 62 °C.
  • VOCs: 720 g/l*.
The figures below should be used only as a general guideline:
8 to 15 m² / litre
1, 5 and 10 containers
  • Keep in a dry place (between 5°C and 30°C).
  • Storage: 24 months following the production date when kept in the original unopened container.
  • Do not treat surfaces until they have first been cleaned and dried.
  • Work in a well ventilated space, well away from any source of ignition.
  • For ideal application and effective protection, TexGuard® Heavy Duty must be used only when the temperature of the air and of the substrates is between 10°C and 30°C.
  • If out of doors, do not apply in the rain.
  • Do not dilute or mix with another product.
  • Follow the advice about the amounts of product to be used, in order to preserve the integrity of the substrate.
  • Allow the treated substrate to dry completely before use.
  • Respiratory protection : Wear a protective mask. Work in a well ventilated space. Do not smoke during application and drying of the treatment.
  • Hand protection : Wear gloves.
  • Skin protection : No special protective clothing or skin protection is required under normal conditions of use.
  • Eye protection : If there is a real risk of splashing, wear protective goggles.
  • If swallowed : Do not induce vomiting. Contact a doctor or a specialist.
KEEP OUT OF THE REACH OF CHILDREN
 
  • Physical state at 20 °C: Liquid.
  • Appearence: Uncoloured.
  • Odour: Solvent.
  • pH: Not applicable.
  • Boiling point [°C]: 198°C.
  • Density: 0.76 ± 0.02.
  • Solubility in water [vol/vol]: Insoluble.
  • Flash point [°C]: 62 °C.
  • VOCs: 720 g/l*.
Physical Propeties/Chemical
Fluorinated acrylic copolymer in a solvent phase.
GUARD INDUSTRIE (FRANCE)
Daniel Bruyat: Business Director
Phone: (+33) 65 84 46 13 73
Email: daniel.bruyat@guardindustrie.com
Website: www.guardindustrie.com     
 
NANO PHAM GROUP (VIET NAM)
Hotline: (+84) 918 244 844
Email: global@nanophamgroup.com
Website:
 
Important: The content of this documentation is based on our experience with the product. Guard Industry guarantees the quality of its products but expresslydisclaims all liability if the user does not follow the recommendations and conditions of use of the products, especially but not exclusively in the case of faultyapplication, application by untrained personnel, use of products not compatible
with Guard Industry products, or adverse weather conditions For more information, consult the safety data sheet.
 
Accessing: 59
  • Ho Chi Minh
  • 97 Street No. 7, An Phu- An Khanh Urban Area, An Phu Ward (District 2), Thu Duc City, Ho Chi Minh City
  • Quang Ngai
  • 370 Nguyen Tu Tan Street, Tran Phu Ward, Quang Ngai City, Quang Ngai Province
  • Danang
  • K21/H2/1 Nguyen Van Hue Street, Thanh Khe Tay Ward, Thanh Khe District, Da Nang City
  • Thua Thien Hue
  • B08 The Manor Crown, To Huu Street, Hue City, Thua Thien Hue Province
  • Quang Binh
  • 37 Tran Kinh Street, Dong Hoi City, Quang Binh Province
  • Ha Tinh
  • 64 Le Thai To Street, Ky Thinh Commune, Ky Anh District, Ha Tinh Province
  • Thai Binh
  • 36A Quang Trung Street, Tran Hung Ward, Thai Binh Province
  • Thanh Hoa
  • 597 Street 1, Quang Hung Ward, Thanh Hoa City, Thanh Hoa Province
  • Hanoi
  • 99 Nhat Chieu Street, Nhat Tan Ward, Tay Ho District, Hanoi City
  • Hotline: 0918 244 844
  • Email:global@nanophamgroup.com
Total online: 1.610.399